Lumenite® Light Sleeve
Buy Emergency Lighting
Flash movie
A totally new and unique emergency lighting solution providing 100% reliable emergency lighting that is fail-safe and free. This simple and ingenious emergency safety lighting system instantly provides low level emergency lighting whenever needed.
Lumenite Light Sleeve Flyer
Lumenite Light Sleeves are a failsafe Lighting source.

Install Lumenite® Light Sleeves in all building egress and exit routes, use them to cover all fluorescent tubes, used in overhead fixtures, illuminating lighting stairwells, fire escapes, hallways, exits, elevators and car parking areas. Lumenite Light Sleeves should be installed on 10% to 20% of all fixtures throughout your building so during a power failure the buildings occupants are never left in the dark or subjected to dangerous black-out situations.

Lumenite Light Sleeves provide a guaranteed failsafe evacuation system that does not rely on your main power source or batteries, they work every time and require no testing or maintenance. If your lights have been on at all, the Lumenite Light Sleeves are charged for a minimum of 8 hours of passive, power free, failsafe illumination.

* Low initial cost
* No ongoing costs
* No batteries needed
* No mains power source needed
* No wiring needed
* No alterations to your existing fittings
* No tools needed
* No switches needed
* No internal parts
* Automatic and instant activation
* Reduced power bills
* Increased security
* Increased safety
* Environmentally friendly
* Provides tube breakage protection
* Qualifies as a glass containment device
* 100% reliable
* Non-toxic
* Sites kept illuminated under all conditions
* Quick and easy to install
* Last for up to 20 years

For use with all 4' foot T8 and T12 fluorescent lamps.

Designed to fit T-8 and T-12 Lamps
Click Here For Lumenite Light Sleeve Technology Presentation
Room with Lights On
Room with Lights Off- Lumenite Light Sleeve illumination
Lumenite Light Sleeve Flyer details
Lumenite Light Sleeves in use.
The Lumenite Light Sleeve is available as a full length totally encapsulating glass containment design providing maximum emergency light output.

The sleeve is also available as a custom fit unit, designed to balance unfiltered light with evacuation lighting allowing increased use of the sleeve in high level lighting demand areas. A custom length sleeve can be used to increase light output in areas where a fully sleeved lamp decreases light levels lower than desired.

Custom Length Lumenite Light Sleeves
HYLINE SAFETY COMPANY and LUNA GLOW have been awarded for being recognized as one of Buildings Magazine's Top 100 Product Picks. Our Lumenite Light Sleeve product was picked out as an Editors Choice Top Product from one of the many hundreds of products submitted and was featured in the December 2005 issue of Buildings Magazine. This special edition of Buildings Magazine will reach the hands of 72,000 building owners and facility management professionals.
The Lumenite Light Sleve is a Buildings Magazine Editors Choice Top 100 Product
The Lumenite Light Sleeve has wonn the 2005 Commitment to Safety Award
Hyline Safety has won the Compliance Magazine 2005 Commitment to Worker Safety Award in the Best in Security category for its patented Lumenite Light Sleeve product made by Luna Glow.

The award will be presented at the National Safety Congress Expo in Orlando, FL  on Sept. 21, 2005

-- The Compliance Magazine Commitment to Worker Safety Award recognizes achievements in safety equipment product development.

-- A panel of impartial industry experts evaluated each entry based on innovation, impact on worker safety, and ease of use. The 2005 judging panel:

• Jan Rosenberg, CSP, CSHM, CPCU, ARM, AIM, Chief Administrative Officer—Nevada Safety Consultation and Training Section

• Nancy Moorhouse, Vice President, Director of Safety for Teichert Construction/Teichert Materials, MSP, CSP, ARM, CSHM

• Tom Slavin, Manager Occupational Safety and Health, International Truck & Engine Corp.

Click Here to view Lumenite Light Sleeve Power Point

The NYC subway system has 443 miles of underground track and the same amount of evacuation pathways; the system has 137 underground railway stations all using fluorescent lamp (tube) lighting systems. 

Most other cities mass transit systems are also lit using fluorescent lamps.  

We have Interviewed hundreds of train & bus operators and mass transit facilities directors and station managers - all have told us that their Emergency Lighting Systems are generally inadequate; all discovered that in actual emergencies or during tests that Emergency Lighting systems were often defective due to improper maintenance of lamps and batteries, Most expressed that they had inadequate numbers of Emergency Lights to safely illuminate their stations, light up passenger platforms, waiting areas or exit passageways when power is suddenly lost. This poses a major safety threat. Subway, train and bus passengers waiting on platforms, in stations, walking through underground corridors or g_d forbid passengers evacuating through exit tunnels-all of these people must do so in almost total darkness and only can truly only safely evacuate when assisted by the transit system's emergency personnel with flashlights and lanterns. This should not be occurring as there is a simple and cost effective method to provide fail safe lighting for all emergencies.

Lumenite Light Sleeves are used on all fluorescent lighting tube lamp fixtures in place to illuminate stations, stairwells, corridors, underground tunnels, exit routes, fire escapes, hallways, elevators, car parking areas, as well as use on train platforms and train cars. Light Sleeves are ideally installed on small percentage 25% of all fluorescent fixtures throughout a station (or facilities area) so in the event of sudden power failure, the transit systems occupants are never left totally in the dark or subjected to dangerous blackout situations.

Lumenite Light Sleeves guarantee fail-safe Emergency Lighting for evacuation system that does not rely on the main or alternate power source. They're designed to work every time and require no periodic testing or maintenance. If the facilities fluorescent lights have been on prior to power loss, the Lumenite Light Sleeves are charged for a minimum of 8 hours of passive Emergency Lighting that illuminate without power. When the fluorescent lamps burn out- a new lamp is inserted into the sleeve and they're good to go to provide fail safe emergency lighting. The Lumenite Light Sleeves never need to be replaced and last forever. Lumenite Light Sleeve can even function under water! They light up totally power free, 

This is fail-safe emergency lighting that works in every possible instance.

At present Lumenite Light Sleeves are used by BART, numerous UK trains, in Poland, Belgium, France, Saudi Arabia, Iraq, Malaysia, Adelaide Australia, and Venezuela.